200,000 Customers
ISO 9001
In China
Higher flow rates allow use with 2 (~51 mm) discharge lines. Operates 230 volt 20 amp circuits. PRG-Series grinders can be used as a replacement pump in 2 (~51 mm) discharge systems using LE40 and LE50-series solids-handling pumps.*. *PRG-Series flow rates do not exactly match LE-series flow rates
Get A Quote
2 NPT (~51 mm) or 3 NPT (~76 mm) Discharge . The Pro380-Series is a large capacity shallow system design featuring a 61 cm x 61 cm basin - perfect for bedrock and difficult soil conditions. The Pro380-Series offers a large 41 gallon capacity and longer pump cycles for extended pump life
Get A Quote
flow rate or discharge: H = total head: n = pump efficiency: BHP = brake horsepower: NPSH = net positive suction head: V = velocity of fluid or liquid: p = impeller inlet pressure: p v = vapor pressure of fluid or liquid: SW = specific weight of fluid or liquid: g = acceleration of gravity
Get A Quote
inclined discharge with just a wrench. KTZ422 (4-inch) KTZ622 (6-inch) The long-awaited 22 kW models are now available for the ˜agship KTZ-series!! Submersible Drainage Pumps Design Registration Pending* * Tsurumi has applied for design registration in major countries. MINING 50 Hz MODEL CONSTRUCTION KTZ422 KTZ622
Get A Quote
3/4 hp Mid-Range Effluent Pumps . 3/4 hp 1-1/2 or 2 NPT (~38 mm or ~51 mm) Discharge 3/4 (~19 mm) Solids Handling The FL70-series by Liberty is a mid-range effluent pump designed for STEP systems, mound systems, liquid waste transfer and higher head de-watering applications
Get A Quote
flow rate or discharge: H = total head: n = pump efficiency: BHP = brake horsepower: NPSH = net positive suction head: V = velocity of fluid or liquid: p = impeller inlet pressure: p v = vapor pressure of fluid or liquid: SW = specific weight of fluid or liquid: g = acceleration of gravity
Get A Quote
Hydra-Cell Diaphragm Pumps include liquid end and motor/drive, and handle high discharge pressures up to 1000 psi. Choose from brass or 316 stainless steel pump head depending on your needs. Choose from brass or 316 stainless steel pump head depending on your needs
Get A Quote
You can measure the discharge head by attaching a tube to the discharge side of the pump and measuring the height of the liquid in the tube with respect to the suction of the pump. The tube will have to be quite high for a typical domestic pump. If the discharge pressure
Get A Quote
Nov 17, 2020 As discharge pressure increases, keeping viscosity constant, more fluid slips from the discharge side to the suction side of the pump, so the pump must spin at a higher RPM to maintain output. In Fig. 8, a positive displacement pump curve shows
Get A Quote
50 Hz and 60 Hz power sources are most often used in international power systems. Some countries (regions) commonly use 50Hz power grid while other countries use 60Hz power grid.Alternating current (AC) is changing the direction of the current periodically.Cycle is the time of a cyclical change of the current.Frequency is the times of the current changes per second, unit Hertz (Hz).AC current
Get A Quote
Discharge: 3 , 125 lb, flange horizontal. Spherical solids handling: 2 HP: 2-5 RPM: 1750 Impeller: 2 vane, semi-open, with vanes on back side. Cast iron ASTM A-48, class 30. Shaft: 416 series stainless steel. Motor: NEMA B, three phase, 230 & 460 volts, 60 Hz, oil filled, with class F insulation. Requires overload protection to be included
Get A Quote
1/2 HP Dominator Submersible Sewage Ejector Pump Discharge / Hz / Volts: 3 Discharge / 60 Hz / 115 Volts - Portable Power Water Pumps
Get A Quote
Rail and Disconnect Systems. Z-Rail Disconnect systems (1-1/4 to 3 vertical discharge) or square guide rail systems (1-1/4 , 1-1/2 , 2 discharge), flanged rail systems (2-1/2 to 6 horizontal discharge) Simplifies the installation and removal of a submersible pump from a basin. P/N 10-0789 lifting bails are required on 6160, 6180, 6280
Get A Quote
parts, overheat pump (which can cause burns to people handling or servicing pump), and will void warranty! Do not pump chemicals or corrosive liquids with pump. Hazardous Pressure. A. Use high pressure reinforced type discharge hose ONly. See parts list for available hose, nozzle and fittings. A high pressure relief valve is recom-mended
Get A Quote
Buy 1/2 HP Dominator Submersible Sewage Ejector Pump Discharge/Hz/Volts: 2 Discharge / 60 Hz / 115 Volts: Bathroom Accessories - Amazon.com FREE DELIVERY possible on eligible purchases
Get A Quote
This Multiquip, model ST41230, is a Submersible Centrifugal Pump, with a 4 Inch Discharge, 230/460 three-phase, 60 Hz 10 HP, 423GPM, 138ft Total Head. This submersible centrifugal pump is a heavy-duty performance minded product for moving water in multiple confined and open area applications
Get A QuoteCopyright © 2021 Convert Mining Machinery Company All rights reserved sitemap Privacy Policy